wtest.ld
Linker script source for Emulating a round-screen ESP32 board, 17 lines. Raw file
/* Link the whole self-test into one SRAM1 block. The ESP32-S3 sees this block
* on both the instruction bus (0x4037_8000) and the data bus (0x3FC8_8000); the
* emulator resolves data loads from the instruction-bus window too, so code,
* read-only data, data and bss can all live here at one address. _start is
* placed first so the entry point is ORIGIN. */
ENTRY(_start)
MEMORY { ram (rwx) : ORIGIN = 0x40380000, LENGTH = 0x8000 }
SECTIONS {
.text : {
*(.text._start)
*(.text .text.*)
*(.literal .literal.*)
} > ram
.rodata : { *(.rodata .rodata.*) } > ram
.data : { *(.data .data.*) } > ram
.bss : { *(.bss .bss.*) *(COMMON) } > ram
}